Detailed car paint methods
1. Clean the wound Or marks on the car to be clean
If there are rust marks or uneven marks Use sandpaper at the store and scrub the wound only.
*** Do not scrub beyond the wound ***
Then clean Then wipe completely dry
2. If there is any scratches, scratches,
it is recommended to use a polishing remover to remove the scratches and cloth to the car first so that the marks that are not deep to the texture completely disappear.
3. Shake can . Allow the color of the meat to blend together the most Make the color homogeneous
4. Dab or paint on the desired marks, lightly and then allow to dry. (The paint will dry within 10 minutes .. It will dry quickly.)
(If messing up the unwanted part Must immediately wipe off)
** It is recommended to use masking tape to paste around the wound to become easier to spot **
5. Repeat number 4 ... if you feel that The color is still not full, the original wound normally, usually 1-2 color would be enough
6. Let the full color set for 12 hours, after which it will be left alone, or you can wash, polish, coat, polish as you like.
*** Solvent, paint, wash brush or brush using thinner ***
Polishing the car after touchup paint
1. When finished, paint and let it dry for at least 24 hours.
2. Use sandpaper number 2000, dip in water and gently scrub.
The area where we painted To smooth the skin (Try not to touch
Other areas that we do not get many points)
3. After that, use a polish remover Down all over the area, focusing on the polishing
The area that we touchup paint To remove the sandpaper that has rubbed
4. Apply color coating again by applying Let it dry into a stain. Then use a normal wipe cloth It is finished.